Caterpillar SU482 Scoops

Specifications of Caterpillar SU482 Scoops

Specifications

• Height to Top of Body 635.0 mm
• Height to Top of Cab 864.0 mm
• Length 8760.0 mm
• Payload Capacity 4.5 tonnes
• Width 2920.0 mm

Brakes

• Service and Emergency/Park 1 Spring applied hydraulic release SAHR
• Service and Emergency/Park 2 4-wheel wet disc
• Service and Emergency/Park 3 Controlled by modulating valve (Deere axle)
• Service and Emergency/Park 4 Controlled by reverse modulating valve (Kessler axle)
• Service and Emergency/Park 5 Left pedal activated

Dimensions (Approximate)

• Battery Height from Ground – With 64-SS55-19 Battery: 28X15-15 Tires 660 . 0 mm
• Battery Height from Ground – With 64-SS55-19 Battery: 32X15-15 Tires 660.0 mm
• Battery Height from Ground – With 64-SS55-21 Battery: 28X15-15 Tires 760.0 mm
• Battery Height from Ground – With 64-SS55-21 Battery: 32X15-15 Tires 760.0 mm
• Ground Clearance (No Axles Spacers) – With 28 in Tires 150.0 mm
• Ground Clearance (No Axles Spacers) – With 32 in Tires 200.0 mm
• Inside turn radius 2920.0 mm
• Main Frame Height – With 28 in Tires 660.0 mm
• Main Frame Height – With 32 in Tires 740.0 mm
• Minimum Canopy Height – With 28 in Tires 910.0 mm
• Minimum Canopy Height – With 32 in Tires 965.0 mm
• Outside turn radius 6600.0 mm
• Overall Length – With bucket 8230.0 mm
• Overall width – At 21 in extended deck 3150.0 mm
• Overall width – At bucket 2820.0 mm
• Scoop Utility Empty Weights – Less Battery 10090.0 kg
• Scoop Utility Empty Weights – With 64-SS55-19 Battery 13230.0 kg
• Scoop Utility Empty Weights – With 64-SS55-21 Battery 13610.0 kg
• Steering articulation 80° total
• Tram Speed 8.0 km/h
• Wheelbase 3350.0 mm

Drive Train

• Axles 1 John Deere (John Deere axles feature in-board planetaries and wet disc brakes.)
• Axles 2 Kessler (Kessler axles feature wheel and planetaries and wet disc brakes.)
• Drive Lines Heavy duty off-highway driveshafts with slip joints
• Reducer A foot mounted 3.33:1 ratio gearbox

Hydraulics

• Hydraulic Hose and Fittings JIC fittings with high pressure hosing; MSHA 2G flame resistant approved.
• Hydraulic PTO Two (2) quick coupler connections, 1,200 psi (8.3 MPa) maximum recommended operating pressure.
• Lift Cylinder Two (2) 6 in (152 mm) bore, double acting cylinders with forged rods and self-aligning bushings.
• Reservoir Fill System Fill cap assembly in top of reservoir tank.
• Steering Cylinder Two (2) 4 in (102 mm) bore, double acting cylinders with forged rods and self-aligning bearings.

MANUALS

• Types 1 Two Battery Maintenance Manuals
• Types 2 Two Parts Manuals
• Types 3 One LinkOne CD which includes all above manuals in electronic format
• Types 4 Two Electrical Troubleshooting Guides
• Types 5 Two Battery Maintenance Charts
• Types 6 Two Operation and Preventive Maintenance Manuals

OPERATOR’S COMPARTMENT

• Components 1 Extended Operator’s Deck
• Components 2 Right Foot Accelerator Pedal
• Components 3 Left Foot Brake Pedal
• Components 5 Tape Strip Panic Switch that De-Energizes Electrical System and Applies Automatic Brake
• Components 6 Warning Gong
• Components 7 Manual Circuit Breaker Lever Re-Set Handle
• Components 8 Park Brake Release Pressure Gauge
• Components 9 System Pressure Gauge, Accumulator Pressure Gauge
• Valve Bank Hydraulic – Functions: • Steering • Bucket • Bucket Eject • Winch/Power Take Off • Battery Changer

Lift and Carry Capacity

• Capacity 7 tons (6.4 tonnes) at 48 in (1219 mm) from bucket mounting pin

Electrical Controls

• Types Mine duty, 600 amp frame circuit breaker, with UVR (under voltage release) trip unit

Tire/Wheel Option

• Options 1 28x15-15 Tires – Customer specified tire brand and fill type
• Options 2 32x16-15 Tires – Customer specified tire brand and fill type

Operator Control Options

• Options 1 Left hand control stick that incorporates the most common operator functions
• Options 2 Speed control accomplished by right foot activated pedal
• Options 3 Manual Disconnect Switch

Battery Plug – Single Connector Option

• Options 1 Other connector options available upon request
• Options 2 Wrench – brass plug with a captive wrench to install or remove the battery plugs
• Options 3 J&R 2000, 5-pole, Brass w/Captive
• Options 4 Battery plug is rated at 600 amps

Lighting System Option

• Options 1 Ocenco, Halogen, 12VDC, 50 watt – two front headlights with protective guard, and two rear headlights with protective guard.
• Options 2 MCI 12V
• Options 3 MCI 120V

Auxiliary Components

• Components Battery Change Cables

Machine Battery

• Components 1 Battery Tray
• Components 2 Battery Filling System
• Components 3 Battery Receptacle Kit
• Components 4 Battery with Plastisol Coated Tray (Single Connector)

Battery Charger Options

• Options 1 Dual output for two batteries
• Options 2 Single output for one battery

Operator’s Compartment Options

• Options 21 in (533 mm) deck extension to provide better visibility in the lower seams