Caterpillar SU488 D Scoops
Ex-showroom Price
Price not available
Variants
Specifications of Caterpillar SU488 D Scoops
Transmission
- Make/Model Dana 32000 series
- Speeds, Forward and Reverse 4
- Type Power shift with Fwd/Rev mod
Specifications
- Height to Top of Cab 1120.0 mm
- Length 9880.0 mm
- Payload Capacity 14.5 tonnes
Hydraulic System
- Auxiliary System Open center, HRO Control
- Bucket/PTO System Open center/Motor Spool
- Steer/Brake System Open center, HRO Control
- Tank type Sealed
Dimensions (Approximate)
- Adjustable Cab Height (minimum) – 35x15-15 Tires 1257.0 mm
- Adjustable Cab Height (minimum) – 38x16-15 Tires 1295.0 mm
- Adjustable Cab Height (minimum) – 44x18-20 Tires 1372.0 mm
- Ground Clearance (No Axles Spacers) (Please reference sales drawing for Ground Clearance profile) – 35x15-15 Tires 267.0 mm
- Ground Clearance (No Axles Spacers) (Please reference sales drawing for Ground Clearance profile) – 38x16-15 Tires 267.0 mm
- Ground Clearance (No Axles Spacers) (Please reference sales drawing for Ground Clearance profile) – 44x18-20 Tires 267.0 mm
- Inside turn radius 3660.0 mm
- Main Frame Height – 35x15-15 Tires 978.0 mm
- Main Frame Height – 38x16-15 Tires 1016.0 mm
- Main Frame Height – 44x18-20 Tires 1092.0 mm
- Outside turn radius 8940.0 mm
- Overall Length – With contoured bucket 9880.0 mm
- Overall Length – With lifting forks 8970.0 mm
- Overall Width – With contoured bucket 2920.0 mm
- Overall Width – With lifting forks 2720.0 mm
- Scoop utility empty weights 22680.0 kg
- Scoop utility empty weights – with 3,000 lb Ballast 24040.0 kg
- Steering articulation 80°
- Wheelbase 3860.0 mm
Wheels
- Make/Model 3 piece ( Heavy Duty)
ELECTRICAL SYSTEM
- Polarity Floating
- Type Approved flameproof
- Voltage 12
ENGINE SPEEDS
- High Idle 2350.0 RPM
- Low Idle 1000.0 RPM
START SYSTEM
- Type Pneumatic gear reduction
INTAKE AIR CLEANER
- Intake Dual Element Type Primary & Secondary
- Type Dry
TORQUE CONVERTER
- Make/Model Dana integral
- Type Mounted on engine, single element
TIRES – STANDARD
- Load 9120 kg @ 8 km/h (20,100 lb @ 5 mph)
- Size: 35x15-15 – Inflation media Urethane Fill
- Size: 35x15-15 – Ply rating Bias
- Size: 38x16-15 – Inflation media Urethane Fill
- Size: 38x16-15 – Ply rating Bias
- Size: 44x18-20 – Inflation media Urethane Fill
- Size: 44x18-20 – Ply rating Bias
ARTICULATION
- Bearing type and size Pin & bearing
- Bush material Hardened steel
- Degrees of Turn Either Side 45.0 Degrees
- Pin material Hardened steel
OSCILLATION
- Degrees Up and Down from Horizontal 15.0 Degrees
- Type Ball Bearing at Articulation
SEATING (DRIVER)
- Type Adjustable Cross-seated
CANOPY
- Type Adjustable CAB Certified to MSHA req
LIGHTS
- Number/Location 2 front, 2 rear
- Type VICTOR
ALTERNATOR
- Drive Hydraulic
- Type Caterpillar Flameproof
PNEUMATIC SYSTEM
- Air Receiver Volume 106.0 L
- Compressor Type Piston engine gear driven
- Governed Pressure 1.03 Mpa
- Relief Pressure 1.45 Mpa
SERVICE CAPACITIES
- Fuel Tank 132 L (35 gal) – MSHA Limited
- Hydraulic Tank 265.0 L
- With 35x15-15 Tires – 1st gear max 2.9 km/h
- With 35x15-15 Tires – 2nd gear max 6.0 km/ h
- With 35x15-15 Tires – 3rd gear max 10.3 km/h
- With 35x15-15 Tires – 4th gear max 17.9 km/h
GRADE ABILITY
- Front to Rear Up to 30%
HYDRAULIC FILTRATION
- Auxiliary System Pressure 10 micron; Tank mounted, 25 micron
- Bucket/PTO System Pressure 10 micron
- Common Return replaceable bypass
- Steer/Brake System Pressure 10 micron
AXLES (FRONT/REAR)
- Differential Type Hydraulic Actuated, Bevel Gear and Pinion Forced Brake Cooling
- Make/Model Kessler 72 Series
- Type Outboard Planetary/SAHR Brakes
MAXIMUM TRACTIVE EFFORT
- Reference Refer to engineering for information dependent on the applications
STEERING SYSTEM
- Actuation HRO Control
- Control Valve Open center
ENGINE (4 CYLINDER)
- Cooling Fan Hydraulic driven fan
- Cooling System water based radiator
- Displacement 4.8 L
- Engine Make/Model Caterpillar/ Deutz 1013 FC
- Maximum Power Tested 112 kW (150 hp) @ 2,300 rpm
- Maximum Torque Tested 651.0 N·m
- Type Diesel, Turbo Charged, and 4 Cycle
CYLINDERS
- Counterbalance load Lock valves Lift & Tilt (opt)
- Rods Hard chromed
- Type Double acting
ACCUMULATOR BRAKES
- Operation Pre charge 6.2 Mpa (900 psi) – Nitrogen pressure
- Quantity x capacity 1.9 L
- Type Piston
BUCKET SYSTEM
- Actuation HRO
- Control Valve Open center
Lift and Carry Capacity
- Capacity 14.5 tonnes (16 tons) at 914 mm (36 in) from the face of lift plate
Exhaust System
- After Treatment Dry Scrubber
- DPM Control Disposable filter 97% eff
- Make Evarpar/ ECS
- Type Preliminary DOC
Main Hydraulic Pump
- Std pump output @ 2,000 rpm 106.0 L/min
- Type Gear
Cooling/Fan Pump
- Std pump output @ 2,000 rpm 17/45 L/min (4.5/12 gal/min)
- Type Gear
Select Equipment Dealers by Brand and City
Caterpillar SU488 D Scoops Reviews
0.0
Overall
Based on 0 Reviews
Write Review