Caterpillar SU488 L Scoops

Specifications of Caterpillar SU488 L Scoops

Weights

• Scoop Utility Empty Weights – Less Battery 12700.0 kg
• Scoop Utility Empty Weights – With 64-SS55-21 Battery 16220.0 kg
• Scoop Utility Empty Weights – With 64-SS85-21 Battery 19277.0 kg

Dimensions

• Overall Length (with bucket) 8760.0 mm
• Overall Width (at bucket) 2920.0 mm

Specifications

• Height to Top of Cab 1120.0 mm
• Length 8760.0 mm
• Operating Height 864 mm (and above) [34 in (and above)]
• Payload Capacity 9.1 tonnes
• Power Type Battery

Brakes

• Service and Emergency/Park 1 Spring applied hydraulic release SAHR
• Service and Emergency/Park 2 4-wheel wet disc
• Service and Emergency/Park 3 Controlled by reverse modulating valve
• Service and Emergency/Park 4 Left pedal activated

Drive Train

• Axles Heavy duty axles. Features outboard planetary, SAHR brakes, brake cooling and optional Diff-Lock
• Drive Lines Heavy duty off-highway, 7C type driveshafts with slip joints
• Reducer A foot mounted 3.33:1 ratio gearbox

Hydraulics

• Hydraulic Hose and Fittings JIC fittings with high pressure hosing; MSHA 2G flame resistant approved.
• Hydraulic PTO Two (2) quick coupler connections, 8.27 MPa (1,200 psi) maximum recommended operating pressure.
• Lift Cylinder Two (2) 152 mm (6 in) bore, double acting cylinders with forged rods and self-aligning bushings.
• Reservoir Fill System Fill cap assembly in top of reservoir tank.
• Steering Cylinder Two (2) 127 mm (5 in) bore, double acting cylinders with forged rods and self-aligning bearings.

OPERATOR’S COMPARTMENT

• Components 1 Extended Operator’s Deck
• Components 2 Right Foot Accelerator Pedal
• Components 3 Left Foot Brake Pedal
• Components 5 Tape Strip Panic Switch that De-energizes Electrical System and Applies Automatic Brake
• Components 6 Warning Gong
• Components 7 Manual Circuit Breaker Lever Re-set Handle
• Components 8 Park Brake Release Pressure Gauge
• Components 9 System Pressure Gauge
• Valve Bank Hydraulic – Functions: • Steering • Bucket • Bucket Eject • Winch/Power Take Off • Battery Changer

HANDLE MANUALS

• Types 1 Two Battery Maintenance Manuals
• Types 2 Two Parts Manuals
• Types 3 One LinkOne CD which includes all above manuals in electronic format
• Types 4 Two Electrical Troubleshooting Guides
• Types 5 Two Battery Maintenance Charts
• Types 6 Two Operation and Preventive Maintenance Manuals

Lift and Carry Capacity

• Capacity 9.1 tonnes (10 tons) at 1220 mm (48 in) from bucket mounting pin

Tire/Wheel Option

• Options 1 28×15-15 Tires – Customer specified tire brand and fill type.
• Options 2 35×15-15 Tires – Customer specified tire brand and fill type.
• Options 3 32×15-15 Tires – Customer specified tire brand and fill type.

Operator Control Options

• Options 1 Left hand control stick that incorporates the most common operator functions.
• Options 2 Tapeswitch stop switches located on both sides of operator.
• Options 3 Manual Disconnect Switch.

Battery Plug – Single Connector Option

• Options 1 Battery plug is rated at 600 amps.
• Options 2 J&R 2000, 5-pole, Brass with Captive Wrench – brass plug with a captive wrench to install or remove the battery plugs.
• Options 3 Other connector options available upon request.

Lighting System Option

• Options 1 Ocenco, Halogen, 12V DC, 50 watt – two front headlights with protective guard, and two rear headlights with protective guard.
• Options 2 MCI 12V
• Options 3 MCI 120V

Auxiliary Components

• Components Battery Change Cables

Machine Battery

• Components 1 Battery Tray
• Components 2 Battery Filling System
• Components 3 Battery Receptacle Kit
• Components 4 Battery with Plastisol Coated Tray (Single Connector)

Battery Charger Options

• Options 1 Dual output for two batteries
• Options 2 Single output for one battery

Speed

• Tram Speed 8.0 km/h

Electrical Control Box – ECB3

• Type Mine duty, 600 amp frame circuit breaker, with UVR (under voltage release) trip unit.