Caterpillar SU488 LHD Scoops

Specifications of Caterpillar SU488 LHD Scoops

Transmission

• Make/Model Dana 32000 series
• Speeds, Forward and Reverse 4
• Type Power shift with Fwd/Rev mod

Specifications

• Height to Top of Body 864.0 mm
• Height to Top of Cab 1170.0 mm
• Length 8915.0 mm
• Payload Capacity 9.1 tonnes
• Width 2920.0 mm

Hydraulic System

• Auxiliary System Open center, Pilot Control
• Bucket/PTO System Open center, Pilot Control
• Steer/Brake System Open center, Pilot Control
• Tank type Sealed w/Breather

Dimensions (Approximate)

• Adjustable Cab Height (minimum) – 35x15-15 Tires 1120.0 mm
• Adjustable Cab Height (minimum) – 38x16-15 Tires 1140.0 mm
• Adjustable Cab Height (minimum) – 44x18-20 Tires 1220.0 mm
• Ground Clearance (No Axles Spacers) (Please reference sales drawing for Ground Clearance profile) – 35x15-15 Tires 254.0 mm
• Ground Clearance (No Axles Spacers) (Please reference sales drawing for Ground Clearance profile) – 38x16-15 Tires 280.0 mm
• Ground Clearance (No Axles Spacers) (Please reference sales drawing for Ground Clearance profile) – 44x18-20 Tires 356.0 mm
• Inside turn radius 3660.0 mm
• Main Frame Height – 35x15-15 Tires 1090.0 mm
• Main Frame Height – 38x16-15 Tires 1140.0 mm
• Main Frame Height – 44x18-20 Tires 1220.0 mm
• Outside turn radius 8940.0 mm
• Overall Length – With bucket 9910.0 mm
• Overall Length – With lifting forks 9910.0 mm
• Overall Width – With contoured bucket 2845.0 mm
• Overall Width – With lifting forks 2845.0 mm
• Scoop utility empty weights 19500.0 kg
• Scoop utility empty weights – with 3,000 lb Ballast 20870.0 kg
• Steering articulation 80°/Total
• Wheelbase 3940.0 mm

Wheels

• Make/Model 3 piece (Heavy Duty)

ELECTRICAL SYSTEM

• Polarity Floating
• Type Open
• Voltage 12/24

ENGINE SPEEDS

• High Idle 2450.0 RPM
• Low Idle 900.0 RPM

START SYSTEM

• Optional motor type Electronic 12 Volt
• Starter Motor Type Electronic 24 Volt

INTAKE AIR CLEANER

• Intake Dual Element Type Primary & Secondary
• Type Dry

TORQUE CONVERTER

• Make/Model Dana integral
• Type Mounted on engine, single element

TIRES – STANDARD

• Load 9120 kg @ 8 km/h (20,100 lb @ 5 mph)
• Size: 35x15-15 – Inflation media Urethane Fill
• Size: 35x15-15 – Ply rating Bias
• Size: 38x16-15 – Inflation media Urethane Fill
• Size: 38x16-15 – Ply rating Bias
• Size: 44x18-20 – Inflation media Urethane Fill
• Size: 44x18-20 – Ply rating Bias

ARTICULATION

• Bearing type and size Pin & bearing
• Bush material Hardened steel
• Degrees of Turn Either Side 45.0 Degrees
• Pin material Hardened steel

OSCILLATION

• Degrees Up and Down from Horizontal 15.0 Degrees
• Type Ball Bearing at Articulation

SEATING (DRIVER)

• Type Adjustable Cab

CANOPY

• Type Adjustable CAB Certified to MSHA req

LIGHTS

• Number/Location 2 front, 2 rear
• Type Ocenco/MCI

ALTERNATOR

• Drive Belt
• Type 14V/90 amps

SERVICE CAPACITIES

• Fuel Tank 132 L (35 gal) – MSHA Limited
• Hydraulic Tank 265.0 L
• With 35x15-15 Tires – 1st gear max 2.9 km/h
• With 35x15-15 Tires – 2nd gear max 6.0 km/h
• With 35x15-15 Tires – 3rd gear max 10.3 km/h
• With 35x15-15 Tires – 4th gear max 17.9 km/h

GRADE ABILITY

• Front to Rear Up to 30%

HYDRAULIC FILTRATION

• Auxiliary System Pressure 10 micron; Tank mounted, 25 micron
• Bucket/PTO System Pressure 10 micron
• Common Return replaceable bypass
• Steer/Brake System Pressure 10 micron

AXLES (FRONT/REAR)

• Differential Type Hydraulic Actuated Brake Cooling Std w/Kessler Axle
• Make/Model Kessler 72 Series; Optional John Deere 1200 Bevel gear and pinion
• Type Outboard Planetary/Optional Inboard Planetary

MAXIMUM TRACTIVE EFFORT

• Reference Refer to engineering for information dependent on the applications

STEERING SYSTEM

• Actuation HRO Control
• Control Valve Closed center

ENGINE (4 CYLINDER)

• Cooling Fan Hydraulic Driven Fan
• Cooling System Water based radiator
• Displacement 4.8 L
• Engine Make/Model Deutz 1013 FC
• Maximum Power Tested 112 kW (150 hp) @ 2,300 rpm
• Maximum Torque Tested 650.0 N·m
• Type Diesel, Turbo Charged, and 4 Cycle

CYLINDERS

• Rods Hard chromed
• Type Double acting
• Counterbalance load Lock valves Lift & Tilt

ACCUMULATOR BRAKES

• Operation Pre charge 6.2 Mpa (900 psi) – Nitrogen pressure
• Quantity × Capacity 1.9 L
• Type Piston

BUCKET SYSTEM

• Actuation HRO
• Control Valve Closed center w/float

Lift and Carry Capacity

• Capacity 10.9 tonnes (12 tons) at 914 mm (36 in) from bucket/RAS pivot

Exhaust System

• After Treatment Optional
• DPM Control Ceramic filter option
• Make Evarpar/ECS
• Type Preliminary DOC

Main Hydraulic Pump

• Std pump output @ 2,000 rpm 106.0 L/min
• Type Gear

Cooling/Fan Pump

• Std pump output @ 2,000 rpm 17/45 L/min (4.5/12 gal/min)
• Type Gear