Chetra TG 122 Base
Ex-showroom Price
Price not available
Variants
Chetra TG 122 Base Truck Description
The Chetra TG 122 Base is a robust pipelayer known for working in tough environmental conditions. It showcases the durability and simplicity of Russian engineering. Check its lifting capacity and track design details on MotorBazee. With low maintenance and high reliability, the Chetra TG 122 is an effective and affordable choice for pipeline contractors, performing reliably in all weather conditions.
Key Specifications of Chetra TG 122 Base Equipment
Calculate Chetra TG 122 Base Monthly EMI
20
Monthly EMI
Down Payment
₹ 0
Total Loan Amount
₹ 0
Specifications of Chetra TG 122 Base
Engine
- Cylinder bore and piston stroke 120 mm x136.4 mm
- Displacement 6.7 L
- Engine Model Cummins Make, Model: QSB6.7-C165, six cylinder in-line, four stroke, turbocharged, air-to-air after cooled engine
- Engine power,kW (h.p.) 110 (150)@ 2000 rpm
- Lifting capacity, kg 26500
- Max. Torque 800 Nm at 1300...1 500 rpm
- Model TG 122
- Operating weight, kg 24500
Transmission
- Forward 1 3.7
- Forward 2 6.7
- Forward 3 10.8
- Reverse 1 4.9
- Reverse 2 8.8
- Reverse 3 13.9
Undercarriage
- Ground Contact Area 3,385 Sq.M
- Ground Pressure 0,66 kgf/cm²
- Grouser Height 65 mm.
- Number of Shoes (each side) 43.
- Shoe width 560 mm.
- Suspension rigid, with a transverse beam. Track rollers, support rollers and idlers feature life-time lubrication and self-adjusting "duo-cone" type seals.
Final Drives
- FINAL DRIVES Final drive is double-stage: the 1st stage consists of outside diameter gears; the 2d stage is planetary with "k+1" scheme (with a stopped crown gear).
Pipelaying Equipment
- Boom The welded, box-sectioned boom is triggered through sheave block system by the inch. Boom length-7 m. Boom weight-1,150 kg.
- Counterweights Segmented 4-plate type of 423 kg each mounted on the counterweight frame. Hydraulically controlled by NSh-100 pump, section of the general distributor and 100 mm diameter hydraulic cylinder.
- Hook The hook is triggered through sheave block system by the winch. Hook lift (overhang) -1.5-1.6 m. Hook raise/lower speeds at 2,000 rpm, 8 -21 m/min
- Load lifting capacity 12 500 kg. Rated lifting capacity - 26 500 kg. Is designed to lay pipes into trenches and to perform other handling operations. Sheave blocks ratio: loading-4, boom-4
- Winch Hydraulically controlled, double drum winch. Closed type disk brakes.
- Winch overall dimensions Drum (diameter x width), mm - 325 x 255. Cable dimensions (diameter x length): hook-16 mm x46 M, boom-16 mmx46 m
Chetra TG 122 Base Reviews
0.0
Overall
Based on 0 Reviews
Write Review
Frequently Asked Questions
The Chetra TG 122 Base is a robust pipelayer that performs reliably in tough environmental conditions. It is known for its durability and simplicity, making it an effective and affordable choice specifically for pipeline contractors who need reliable performance in all weather conditions.
The equipment utilizes a Cummins QSB6.7-C165 engine, which is a six-cylinder, four-stroke, turbocharged, air-to-air after cooled engine. This engine provides an output power of 110 kW (or 150 hp) at 2000 rpm and features a maximum torque of 800 Nm at 1300-1500 rpm.
The welded box-sectioned boom has a length of 7 meters. The hook lift (overhang) ranges from 1.5 to 1.6 meters, with the winches featuring cable dimensions options for the hook (16 mm x 46 M) and the boom (16 mm x 46 m).
The rated lifting capacity for this equipment is 26,500 kg. Additionally, the load lifting capacity measured by the hook system is listed as 12,500 kg.
