Hyundai Equipment R110-7 Base

Specifications of Hyundai Equipment R110-7 Base

Engine

• Engine Model Kirloskar 4R 1040T
• Gross Power 94 HP (70 kW) @ 1950 rpm
• Max Torque 376 Nm (277 lbf.ft) @1500 rpm
• Piston displacement . 4160 cc
• Power – Net 81 HP (60 kW) @ 1950 rpm
• Type Water cooled, 4 cycle diesel, 4 cylinder in line, direct injection turbocharged

Weights

• Bucket capacity 0.6m GP , 0.45m HD SAE, PC SA Heaped
• Operating Weight 11200 kg

Dimensions

• Ground clearance, counterweight 900
• Minimum ground clearance 440
• Overall height 2550
• Overall height of cabin 2800
• Overall Length 7240
• Overall Length crawler 3340
• Overall Width 2490
• overall width of uperstructure 2475
• Rear end length 2110
• Tail swing radius 2130
• Track Gauge 1990
• Track Shoe Width 500
• Tumbler distance (mm) 2610

Hydraulic System

• Maximum flow. 2 x 112 Ipm
• Pump Type Two variable displacement piston pump
• Relief Valve impliment circuit 330 kgf/cm²
• Relief Valve travel 330 kgf/cm²

Brakes

• Drive method Fully hydrostatic type
• Drive motor Axial piston motor in shoe design
• Parking brakes multi wet disk

Undercarriage

• Center Frame X-leg type
• No. of carrier rollers each side 1
• No. of rail guards on each side 1
• No. of shoe each side 41
• No. of track rollers 6
• Track frame pentagonalbox type

SWING SYSTEM

• Swing bearing lubrication grease bathed
• Swing brake multi wet disk
• Swing motor Axial piston motor
• Swing reduction Planetry gear reduction
• Swing speed 13 rpm

WORKING RANGE

• Max. digging depth 4770
• Max. digging height 7900
• Max. digging reach 7460
• Max. digging reach at ground level 7320
• Max. dumping height 5540
• Min. swing radius 2340