Hyundai Construction R210-7 Base

Specifications of Hyundai Construction R210-7 Base

Engine

• Engine Model Cummins 6BT5.9-C
• Gross Power 140 HP (104 kW) @ 2000 rpm
• Max Torque 571 Nm (421 lbf.ft) @ 1300 rpm
• Piston displacement . 5880 cc
• Power – Net 133 HP (99 kW) @ 2000 rpm
• Type Water cooled, 4 cycle diesel, 4 cylinder in line, direct injection turbocharged

Weights

• Bucket capacity 0.92 m GP, 0.87m RB SAE Heaped
• Operating Weight 21200 kg

Dimensions

• Ground clearance, counterweight 1060
• Minimum ground clearance 480
• Overall height of cabin 2920
• Overall Length 9570
• Overall Length crawler 4160
• Overall Width 2800
• overall width of uperstructure 2700
• Rear end length 2770
• Tail swing radius 2830
• Track Gauge 2200
• Tumbler distance (mm) 3370

Hydraulic System

• Maximum flow. 2 x 220 lpm
• Pump Type Two variable displacement piston pumps
• Relief Valve impliment circuit 330 kgf/cm²
• Relief Valve travel 330 kgf/cm²

Brakes

• Drive method Fully hydrostatic type
• Drive motor Axial piston motor in-shoe design
• Parking brakes multi wet disk

Undercarriage

• Center Frame X-leg type
• No. of carrier rollers each side 2
• No. of rail guards on each side 1
• No. of shoe each side 46
• No. of track rollers 7
• Track frame pentagonalbox type

SWING SYSTEM

• Swing bearing lubrication Grease bathed
• Swing brake Multi wet disc
• Swing motor Axial piston motor
• Swing reduction Planetary gear reduction
• Swing speed 11 rpm

WORKING RANGE

• Max. digging depth 6220
• Max. digging height 9340
• Max. digging reach 9500
• Max. digging reach at ground level 9330
• Max. dumping height 6520
• Min. swing radius 3740