JCB 2DXL- Super- Loader 2DXL-31
Ex-showroom Price
Price not available
Variants
Specifications of JCB 2DXL- Super- Loader 2DXL-31
Engine
- Electrical System 100 Ampere-hour 12 Volts battery system with alternator and full road lighting
Body Capacities
- Payload 1000
Steering
- Steering Full power, Front wheel hydrostatic power steering with manual capability in the event of engine or hydraulic power failure. • Max. Steering Angle: ± 43
Turning Circle
- A“ Outside loader bucket 11.34 m
- B. Outside Wheel 8.0 m
Dimensions
- Minimum ground clearance 0.33 (1-1)
- Overall Length 5.90 (19-4) (Standard shovel)
- Overall Width 1.85 (6-1)
- Rear Overhang 1.48 (4-6)
- Track Width - Front 1.58 (5-2)
- Track Width - Rear 1.42 (4-8)
- Wheelbase 2.08 (6-10)
Specifications
- Height to Top of Cab 2.66 (8-8)
Turning Circle: Wall-to-wall
- Outside Front Wheels 8.72 m
- Outside Widest Loader Bucket 11.80 m
Tires
- FRONT 8.25 X 16
- Front tyre pressure 80 PSI (8.25 X 16)
- Rear : 14.9 X 24 (Industrial Traction Pattern Tyres) & 12.0 X 24 (Heavy Duty Tyres)
- Rear type pressure 31 PSI (14.9 X 24) 44 PSI (12.0 X 24)
Loader Performance
- Below ground level dig depth 0.105 (0-4)
- Dump Angle 43
- Dump Height 3.10 (10-2)
- Load Over Height 3.55 (11-8)
- Loader arm break-out force 1700
- Max reach at full height 1.04 (3-5)
- Pin Forward Reach 0.27 (0-11)
- Pin Height 3.71 (12-2)
- Reach at full height - Shovel dumped 0.73 (2-5)
- Reach at Ground 1.88 (6-2)
- Rollback at ground 44
- Shovel break-out force 3480
- Standard shovel 0.60 (G.P. Shovel)
Axles
- Front axle type 2WD steer axle, centrally pivoted with oscillation angle of 16o
- Rear axle type Drive axle rigidly mounted incorporates JCB Max-Track torque proportioning differential, driven by prop shaft from gear box
Power Train
- Travel Speed - Fwd. 1st 4.4
- Travel Speed - Fwd. 2nd 7.1
- Travel Speed - Fwd. 3rd 15.2
- Travel Speed - Fwd. 4th 28.8
- Travel Speed - Rev. 1st 4.4
- Travel Speed - Rev. 2nd 7.1
- Travel Speed - Rev. 3rd Not recommended
- Travel Speed - Rev. 4th Not recommended
Hydraulic Controls
- Main Relief Valve - Pressure Setting 170 bar (2465 psi)
Hydraulics
- Pump flow : 63 lpm
- Pump type 2 Section Displacement gear
Buckets
- Width over shovel 1.93 (6-4)
SERVICE CAPACITIES
- Engine Coolant 13.5 Lit
- Hydraulic Tank 60 Lit
Capacity
- Engine oil 8.0 Lit
- Fuel Tank 60 Lit
- Rear Axle Oil 21 Lit
- Transmission 16 Lit
Optional Engine
- Displacement 3.2 litres
- Engine Model KOEL 4R810, naturally aspirated, 4 cylinder, water cooled, BS-III diesel engine
- Gross Power 49.5 hp @ 2200 rpm/ 47.5hp @ 1800 rpm
- Gross Torque 203 Nm (20.7kgm) @ 1300 rpm
Dimensional Specifications and Weights
- Shipping weight (3.1 m with standard bucket & Cab) 5600 kg
Select Equipment Dealers by Brand and City
JCB 2DXL- Super- Loader 2DXL-31 Reviews
Overall
Based on 0 Reviews
Write Review