JCB 2DXL- Super- Loader 2DXL-31

Specifications of JCB 2DXL- Super- Loader 2DXL-31

Engine

• Electrical System 100 Ampere-hour 12 Volts battery system with alternator and full road lighting

Body Capacities

• Payload 1000

Steering

• Steering Full power, Front wheel hydrostatic power steering with manual capability in the event of engine or hydraulic power failure. • Max. Steering Angle: ± 43

Turning Circle

• A“ Outside loader bucket 11.34 m
• B. Outside Wheel 8.0 m

Dimensions

• Minimum ground clearance 0.33 (1-1)
• Overall Length 5.90 (19-4) (Standard shovel)
• Overall Width 1.85 (6-1)
• Rear Overhang 1.48 (4-6)
• Track Width - Front 1.58 (5-2)
• Track Width - Rear 1.42 (4-8)
• Wheelbase 2.08 (6-10)

Specifications

• Height to Top of Cab 2.66 (8-8)

Turning Circle: Wall-to-wall

• Outside Front Wheels 8.72 m
• Outside Widest Loader Bucket 11.80 m

Tires

• FRONT 8.25 X 16
• Front tyre pressure 80 PSI (8.25 X 16)
• Rear : 14.9 X 24 (Industrial Traction Pattern Tyres) & 12.0 X 24 (Heavy Duty Tyres)
• Rear type pressure 31 PSI (14.9 X 24) 44 PSI (12.0 X 24)

Loader Performance

• Below ground level dig depth 0.105 (0-4)
• Dump Angle 43
• Dump Height 3.10 (10-2)
• Load Over Height 3.55 (11-8)
• Loader arm break-out force 1700
• Max reach at full height 1.04 (3-5)
• Pin Forward Reach 0.27 (0-11)
• Pin Height 3.71 (12-2)
• Reach at full height - Shovel dumped 0.73 (2-5)
• Reach at Ground 1.88 (6-2)
• Rollback at ground 44
• Shovel break-out force 3480
• Standard shovel 0.60 (G.P. Shovel)

Axles

• Front axle type 2WD steer axle, centrally pivoted with oscillation angle of 16o
• Rear axle type Drive axle rigidly mounted incorporates JCB Max-Track torque proportioning differential, driven by prop shaft from gear box

Power Train

• Travel Speed - Fwd. 1st 4.4
• Travel Speed - Fwd. 2nd 7.1
• Travel Speed - Fwd. 3rd 15.2
• Travel Speed - Fwd. 4th 28.8
• Travel Speed - Rev. 1st 4.4
• Travel Speed - Rev. 2nd 7.1
• Travel Speed - Rev. 3rd Not recommended
• Travel Speed - Rev. 4th Not recommended

Hydraulic Controls

• Main Relief Valve - Pressure Setting 170 bar (2465 psi)

Hydraulics

• Pump flow : 63 lpm
• Pump type 2 Section Displacement gear

Buckets

• Width over shovel 1.93 (6-4)

SERVICE CAPACITIES

• Engine Coolant 13.5 Lit
• Hydraulic Tank 60 Lit

Capacity

• Engine oil 8.0 Lit
• Fuel Tank 60 Lit
• Rear Axle Oil 21 Lit
• Transmission 16 Lit

Optional Engine

• Displacement 3.2 litres
• Engine Model KOEL 4R810, naturally aspirated, 4 cylinder, water cooled, BS-III diesel engine
• Gross Power 49.5 hp @ 2200 rpm/ 47.5hp @ 1800 rpm
• Gross Torque 203 Nm (20.7kgm) @ 1300 rpm

Dimensional Specifications and Weights

• Shipping weight (3.1 m with standard bucket & Cab) 5600 kg