Kobelco CKL1000i Base

Specifications of Kobelco CKL1000i Base

Engine

• Air Cleaner Dry type with replaceable paper element
• Batteries Two 12 volt, 150 Ah/20 HR capacity series connected
• Cooling System Liquid, re-circulating bypass
• Displacement 10.520 liters
• Engine Model HINO P11C-UN
• Fuel filters Replaceable paper element
• Fuel Tank Capacity 370 liters
• Max. Torque 1,300 N • m/1,500 min
• Radiator Corrugated type core, thermostatically controlled
• Rated Power 247kW/ 2,000 min -1 {rpm} (ISO)
• Starter motor 24V / 6.0 kW
• Throttle Electric throttle control, twist grip type
• Type Water-cooled, direct fuel injection, with turbocharger

Weights

• Crane boom Ground pressure 88.9 kPa {0.91 kgf/cm²}
• Crane boom Weight Approx. 83.8 t,

Dimensions

• Max. Combination 51.8 m +18.3 m
• Max. Length 61.0 m
• Max. Lifting Capacity 100 t × 3.0 m***

Hydraulic System

• Control Full-flow hydraulic control system for infinitely variable pressure to front and rear drums, boom hoist brakes and clutches. Controls respond instantly to the touch, delivering smooth function operation
• Control system 7.0 MPa {71 kgf/cm² }
• Cooling system : Oil-to-air heat exchanger (plate-fin type)
• Electrical System All wiring corded for easy servicing, individ- ual fused branch circuits.
• Filtration Full-flow and bypass type with replaceable paper element
• Load hoist, boom hoist and propel system 31.9 MPa {325 kgf/cm² }
• Reservoir capacity 380 liters
• Swing system 7.5 MPa {280 kgf/cm² }

Winch

• Brake Type wet-type multiple disk brake
• Max. Line Speed 120 m/min (1st layer)
• Rated Line Pull(Single Line) 122 kN {12.5 tf}
• Wire Rope Diameter 26 mm × 265 m
• Wire Rope Length 240 m

Hydrostatic Transmission

• Max Travel Speed 1.9 / 1.2 km/h

SWING SYSTEM

• Swing circle Single-row ball bearing with an integral internally cut swing geaR
• Swing lock Manually, two position lock for transportation
• Swing parking brakes A spring-set, hydraulically released multiple-disc brake is mounted on swing motor
• Swing speed 4.0 min-1 {rpm}