Kobelco CKL2600i Base

Specifications of Kobelco CKL2600i Base

Engine

• Air Cleaner Dry type with replaceable paper element
• Batteries Two 12V , 150Ah/20HR capacity batteries, series con- nected
• Cooling System Liquid, recirculating bypass
• Displacement 10.520 liters
• Engine Model Hino diesel engine P11C-UN
• Fuel filters Replaceable paper element
• Fuel Tank Capacity 370 liters
• Max. Torque 1,300 N • m/1,500 min -1
• Radiator Corrugated type core, thermostatically controlled
• Rated Power 247 kW at 2,000 min -1 {rpm} (ISO)
• Starter motor 24 V/6.0 kW
• Throttle Electric throttle control, twist grip type
• Type Water-cooled, direct fuel injection, with turbocharger Compiles with NRMM (Europe) Stage IIIA and US EPA Tier III.

Weights

• Crane boom Ground pressure 109 kPa {1.11 kgf/cm² }
• Crane boom Weight Approx. 214 t,

Dimensions

• Max. Combination 76.2 m + 30.5 m
• Max. Length 91.4 m
• Max. Lifting Capacity 260 t × 4.6 m

Hydraulic System

• Control Full-flow hydraulic control system for infinitely variable pressure to front and rear drums, boom hoist drum and propel. Controls respond instantly to the touch, delivering smooth func- tion operation.
• Control system 5.4 MPa {55 kgf/cm²
• Cooling system : Oil-to-air heat exchanger (plate-fin type)
• Electrical System All wiring corded for easy servicing, individ- ual fused branch circuits.
• Filtration Full-flow and bypass type with replaceable element
• Load hoist, boom hoist and propel system 31.9 MPa {325 kgf/cm² }
• Reservoir capacity 600 liters
• Swing system 27.5 MPa {280 kgf/cm² }

Brakes

• Brakes A spring-set, hydraulically released multiple-disc brake is mounted on the boom hoist motor and operated through a counter-balance valve

Winch

• Brake Type Spring-set hydraulically releasad(Negative)
• Max. Line Speed 100 m/min (1st layer)
• Rated Line Pull(Single Line) 132 kN {13.5 tf}
• Wire Rope Diameter 25.4 mm
• Wire Rope Length 480 m (Main), 390 m (Aux.)

Swing Mechanism

• Swing Speed 2.0 min-1 {2.0rpm}

Hydrostatic Transmission

• Max Travel Speed 1.1 / 0.7 km/h

SWING SYSTEM

• Swing circle Single-row ball bearing with an integral internally cut swing gear
• Swing lock Manually, four position lock for transportation
• Swing parking brakes A spring-set, hydraulically released multiple-disc brake is mounted on swing motor
• Swing speed 2.0 min -1 {rpm}