Komatsu WD600-3 Base
Ex-showroom Price
Price not available
Variants
Komatsu WD600-3 Base Truck Description
The Komatsu WD600-3 Base Wheel Dozer is designed for demanding earthmoving and construction applications. Built with a focus on power, reliability, and fuel efficiency, the WD600-3 Base is ideal for tasks such as grading, pushing, and material handling in harsh working conditions.
Key Specifications of Komatsu WD600-3 Base Equipment
Calculate Komatsu WD600-3 Base Monthly EMI
20
Monthly EMI
Down Payment
₹ 0
Total Loan Amount
₹ 0
Specifications of Komatsu WD600-3 Base
Engine
- Aspiration Air-to-air aftercooled, turbocharged
- Bore 170 mm x 170 mm
- Engine Model Komatsu SAA6D170E-3
- Fuel system Direct injection
- Governor Electronic all speed control
- Gross Power – SAE J1995 89 kW 522 H
- Number of Cylinders 6
- Piston displacement . 23.15 ltr 1413 in³
- Stroke 6.7" x 6.7"
- Type Water-cooled, 4-cycle
Transmission
- Forward 1 6.5/4.0 km/h mph
- Forward 2 11.8/7.3 km/h mph
- Forward 3 20.8/12.9 km/h mph
- Forward 4 36.2/22.5 km/h mph
- Reverse 1 7.2/4.5 km/h mph
- Reverse 2 13.0/8.1 km/h mph
- Reverse 3 23.0 /14.3 km/h mph
- Reverse 4 40.0/24.9 km/h mph
- Torque Converter Type 3-element, single-stage, 2-phase, water cooled
- Travel speed: km/h Measured with 35/65 R33 L4 tires
- Type Full-powershift, planetary gear type
Service Refill Capacities
- Axle (each front and rear) 124 ltr
- Cooling System 160 ltr
- Engine 47 ltr
- Fuel Tank 670 ltr
- Hydraulic System 215 ltr
- Torque converter and transmission 110 ltr
Dimensions
- Ground Clearance 495 mm
- Hitch height 1295 mm
- Overall height, ROPS cab 4250 mm
- Overall height, top of the stack 4125 mm
- Tread 2650 mm
- Width over tires 3570 mm
Hydraulic System
- Bore 30 mm x 529 mm
- Hydraulic pump Gear pump
- Pump Capacity 252 ltr/min 61 3 U.S. gal/min at rated rpm
- Relief Valve Setting 210 kgf/cm² 3,000 psi
- stroke 5.1" x 20.8"
Axles
- Differential gear Front conventional, rear locking
- Drive system Four-wheel drive
- Final reduction gear Planetary gear, single reduction, oil bath
- Front Fixed, full floating
- Rear Center-pin support, full floating, 26 ̊ total oscillation
- Reduction gear Spiral bevel gear
Brakes
- Parking Brake Dry-disc, hydraulically-released, spring applied on front axle input shaft
- Service brakes Hydraulically actuated, wet multi-disc brakes actuate on four wheels
STEERING SYSTEM
- Maximum steering angle 40 ̊ each direction
- Minimum turning radius 8485 mm 27'10"
- Type Articulated type, full-hydraulic power steering independent of engine rpm
Komatsu WD600-3 Base Reviews
0.0
Overall
Based on 0 Reviews
Write Review
Frequently Asked Questions
The Komatsu WD600-3 Base Wheel Dozer is designed for demanding earthmoving and construction applications. It offers power, reliability, and fuel efficiency, making it suitable for tasks such as grading, pushing, and general material handling in harsh working conditions.
The engine is air-to-air aftercooled, turbocharged, with a Bore of 170 mm x 170 mm. It has 6 cylinders and a piston displacement of 23.15 liters (1413 in³). The type is water-cooled and 4-cycle, featuring a direct injection fuel system.
Yes, the vehicle utilizes a Four-wheel drive system. The final reduction gear is planetary with single reduction and an oil bath for both the front and rear axles.
