Mahindra RoadMaster G9595

Specifications of Mahindra RoadMaster G9595

Engine

• Displacement 3532cm3 (cubic centimetre)
• Gross Horse Power 69.9 kW (95hp) @ 2200±50 r/min
• High Idle Speed 2400+/-50 r/min
• Low Idle Speed 850+/-50 r/min
• Model Mahindra BS TREM IV CEV
• No. of cylinders 4
• Peak Gross Torque 401 Nm @ 1200-1500 r/min

Transmission

• Type Carraro 4WDTransmission

Service Refill Capacities

• Circle drive housing Hydraulic cylinders with no end mechanical stoppers
• Fuel Tank 100 litre

Steering

• Steering angle 45 °inner/32 ° outer

Dimensions

• Blade height 516 mm
• Minimum ground clearance 467 mm
• Overall Transport Length 8594 mm
• Track Width - Front 1674 mm
• Track Width - Rear 1654 mm
• Wheel Base 5225 mm
• Width – Outside Front Tires 2021 mm
• Width - Outside Rear Tires 2001 mm

Hydraulic System

• Steering Power Steering
• Steering Valve Load sensing with priority valve 200 cm3 (cubic centimetre)
• Working Pressure – max 20 Mpa

Tires

• Tyre pressure (min/max) 44 psi
• Tyre specification 13 x 24-12 PR

Brakes

• Parking Brake Hand operated, mechanically, actuated Caliper Brakes on middle axle
• Service brakes Foot operated hydraulically actuated oil immersed disc in middle axle

Blades

• Blade Tip Angle - Forward 40º
• Cutting edge 3000 mm {4 piece cutting edge} {1100 + 1100 + 400+ 400}
• Thickness 16 mm

Electrical

• Alternator 12 V, 90 amphere
• Bettery Capacity 12 V, 100 AH
• Voltage 12 V

General Data

• Fuel Tank Refill Capacity: Scraper 50 litre

Scraper Bowl

• Thickness of Cutting Edge 16 mm

Hydraulics

• Pump type Fixed Displacement Tandem Gear Pump 26 + 26 cm3 (cubic centimetre)

BLADE SPECIFICATIONS

• Blade Tilt Angle - Left 20º / 15º
• Blade Tilt Angle - Right 25.6º / 20º

SERVICE CAPACITIES

• Fuel tank capacity 60 litre
• Hydraulic Tank 50 litre

GENERAL SPECIFICATIONS

• Blade down pressure 27 kN
• Fuel Type Diesel

AXLES (FRONT/REAR)

• Type Driven, Non Steerable, Rigid

AXLES STANDARD

• Front Axle None Driven, Steerable Central Pivoted
• Rear Axle Driven, Non Steerable, Central Pivoted

SHUTDOWN SYSTEM

• System Type Open Centre

Capacity

• Engine Coolant 17 litre
• Engine oil 13.5 litre
• Rear Axle Oil 14.5 Litre for each axle
• Transmission Oil 16 litre

Final Drives

• Total Reduction Ratio 19.04

AC Drive System

• Cooling System water cooled

Optional Engine

• Bore 96mm
• Stroke 122 mm

MOLDBOARD

• Blade Pull – maximum GVW 27 kN
• Cutting Edge – width 152 mm

WEIGHTS – TYPICALLY EQUIPPED

• Gross Vehicle Weight 9400±188

NET POWER: VHP - NET

• Gear: Forward - 1st 5.603
• Gear: Forward - 2nd 3.481
• Gear: Forward - 3rd 1.585
• Gear: Forward - 4th 0.793
• Gear: Reverse - 1st 4.643
• Gear: Reverse - 2nd 2.884
• Gear: Reverse - 3rd - 6th 1.313/0.657

NET POWER: VHP PLUS – NET

• Gear: Forward – 1st 4.5 to 6.0
• Gear: Forward – 2nd 7.5 to 9.0
• Gear: Forward – 3rd 16.5 to 18.5
• Gear: Forward – 4th 33.0 to 36.5
• Gear: Reverse – 1st 5.5 to 7
• Gear: Reverse – 2nd 9.0 to 10.5

DIESEL ENGINES

• Aspiration Turbo Charged

ELECTRIC MOTOR – 6018 AC/6018 AC FS

• Voltage 12 V

BACKHOES

• Side Shift 513 mm

Blade

• Circle turning angle 50° from transverse of vehicle
• Width 200 mm