Sany SY240C-9LCHD Hydraulic Excavator

Specifications of Sany SY240C-9LCHD Hydraulic Excavator

Engine

• Battery 2X12 V
• Displacement 6.49 L
• Max. Torque 637.9 N.m @ 1800 rpm
• Model Isuzu CC-6BG1TRP
• Rated Engine Power 173HP(128.5 kW) @ 2100 rpm
• Type 6 Cylinder, Inline, Water Cooled

Service Refill Capacities

• Engine Oil 24.5 L
• Fuel Tank 340 L
• Hydraulic Tank 240L (Tank) 201 L (Refill)
• Radiator 29 L
• Swing device 5.3 L
• Travel device 2×5.0L

Hydraulic System

• Main pumps 2 Variable Displacement Axial Piston Pumps
• Max. Flow 2 X 246 lpm
• Pilot pump 1 Gear Pump

Undercarriage

• Lower Roller (Each side) 9
• Std. Arm 2900 mm
• Std. Boom 5900 mm
• Std. Bucket 1.2 m² HD
• Std. Track 600 mm
• Track Guard(each Side) 2
• Track Shoes (Each Side) 49
• Upper Roller (Each side) 2

SWING SYSTEM

• Swing motor 1 Axial Piston Motor with Swing Holding Brake
• Swing speed 11 rpm

DIGGING FORCES

• Arm Crowding Force 122 KN
• Bucket DIGGING FORCES 175 kN

WORKING RANGE

• Max. Cutting Height 9640
• Max. digging depth 6785
• Max. digging reach 10150
• Max. dumping height 6725
• Max. Height at Min. Swing Radius 7940
• Min. swing radius 3800

Travel System

• Gradeability 70%/35°
• Ground Pressure 47.6 kPa
• Max traction force 209 kN
• Max. Travel Speed (L/H) 5.5/3.5 km/h
• Travel Motors 2 Axial Piston Motor with Parking Brake

RELIEF VALVE SETTINGS

• Implement Circuit 34.3 Mpa
• Pilot Circuit 3.9 Mpa
• Swing Circuit 25.5 Mpa
• Travel Circuit 34.3 Mpa

Dimension

• Distance between Tumbles 3640
• Min. Ground Clearance 470
• Overall Height 3550
• Overall Height of Cab 3075
• Overall Length 9920
• Overall Width 2980
• Rear-end Swing Radius 2890
• Std. Track Shoe Width 600
• Track Gauge 2380
• Under Carriage Length 4445
• Upper Width 2710

CONTROL SYSTEM

• Control Hydraulic System Positive Flow
• Control System DOMCS Intelligent Controller
• Remote Monitoring System GPRS, GPS, GIS
• Working Modes H, S, L, B