Sany SY245C-9LR 15M Long Reach Hydraulic Excavator

Specifications of Sany SY245C-9LR 15M Long Reach Hydraulic Excavator

Engine

• Batteries 2 X 12 V
• Displacement 5.88 L
• Max. Torque 571 N.m @ 1300 rpm
• Model Cummins 6BT5.9-C140
• Rated Engine Power 140 HP(104 kW) @ 2000 rpm
• Type 6 Cylinder, Inline, Water Cooled

Service Refill Capacities

• Engine Oil 22.75 L
• Fuel Tank 340 L
• Hydraulic Tank 240 L (Tank) 180 (Refill)
• Radiator 25.2 L
• Swing device 4 L
• Travel device 2×5.5 L

Hydraulic System

• Main pumps 2 Variable Displacement Axial Piston Pumps
• Max. Flow 2 X 220 Ipm
• Pilot pump 1 Gear Pump
• Swing Motor 1 Axial Piston Motor with Swing Holding Brake
• Travel Motor 2 Axial Piston Motor with Parking Brake

Undercarriage

• Lower rollers 9
• Std. Arm 6020 mm
• Std. Boom 8500 mm
• Std. Bucket 0.45 m³
• Std. Track 800 mm / 600mm (Opt)
• Track Guard (Each Side) 2
• Track Shoes (Each Side) 49
• Upper rollers 2

WORKING RANGE

• Max. Cutting Height 11265
• Max. digging depth 11970
• Max. digging reach 15030
• Max. dumping height 9275
• Max. Height at Min. Swing Radius 9615
• Min. swing radius 5765

Performance Data

• Arm Digging Force 61.7 kN
• Bucket Digging Force 88.2 KN
• Gradeability 70%/35°
• Max. Tracking Force 209 kN
• Max. Travel Speed (High/Low) 5.4/3.3 km/h
• Swing Speed 11 rpm

RELIEF VALVE SETTINGS

• Implement Circuit 34.3 Mpa
• Pilot Circuit 3.9 Mpa
• Swing Circuit 25.5 Mpa
• Travel Circuit 34.3 Mpa

Dimension

• . Min. Ground Clearance 470
• Distance between Tumbles 3640
• Overall Height 3265
• Overall Height of Cab 3075
• Overall Length 12357
• Overall Width 3180
• Rear-end Swing Radius 2725
• Std. Track Shoe Width 800
• Track Gauge 2380
• Under Carriage Length 4445

CONTROL SYSTEM

• Control System DOMCS Intelligent Controller
• Remote Monitoring System GPRS, GPS, GIS
• Working Modes H S L B