Sany SY285C-9LR 18m Super Long Reach Hydraulic Excavator

Specifications of Sany SY285C-9LR 18m Super Long Reach Hydraulic Excavator

Engine

• Batteries 2X2V
• Displacement 6.49L
• Max. Torque 637.9 N.m @1800rpm
• Model Isuzu CC-6BG1TRP
• Rated Engine Power 173 HP (128.5 kW)@2100rpm
• Type 6 Cylinder, Inline, water cooled

Service Refill Capacities

• Engine Oil 24.5 L
• Fuel Tank 340 L
• Hydraulic Tank 239 L(Tank) 201L (Refill)
• Radiator 29 L
• Swing device 5.3 L
• Travel device 2X5 L

Hydraulic System

• Main pumps 2 Variable Displacement Axial Piston pumps
• Max. Flow 2X246 LPM
• Pilot pump 1 Gear Pump
• Swing Motor 1 Axial Piston Motor With Swing Holding Brake
• Travel Motor 2 Axial Piston Motor With Parking Brake

Undercarriage

• Lower rollers 9
• Std. Arm 7500 mm
• Std. Boom 9800 mm
• Std. Bucket 0.45m³/0.65 m²
• Std. Track 800 mm
• Track Guard (Each Side) 2
• Track Shoes (Each Side) 49
• Upper rollers 2

WORKING RANGE

• Max. Cutting Height 14070
• Max. digging depth 14190
• Max. digging reach 17770
• Max. dumping height 11820
• Max. Height at Min. Swing Radius 11010
• Min. swing radius 6515

Performance Data

• Arm Digging Force 57kN
• Bucket Digging Force 88.4kN
• Gradeability 70%/35"
• Ground Pressure 48.1kPa
• Max. Tracking Force 209kN
• Max. Travel Speed (High/Low) 5.5/3.5 km/h
• Swing Speed 11 rpm

RELIEF VALVE SETTINGS

• Implement Circuit 34.3 Mpa
• Pilot Circuit 3.9 Mpa
• Swing Circuit 25.5 Mpa
• Travel Circuit 34.3 Mpa

Dimension

• . Min. Ground Clearance 470
• Distance between Tumbles 3640
• Overall Height 3500
• Overall Height of Cab 2990
• Overall Length 13790
• Overall Width 3180
• Rear-end Swing Radius 2890
• Std. Track Shoe Width 800
• Track Gauge 2380
• Under Carriage Length 4445

CONTROL SYSTEM

• Control System DOMCS Intelligent Controller
• Remote Monitoring System GPRS, GPS, GIS
• Working Modes H,S,L,B