Schwing Stetter ZL48GV Wheel Loader

Specifications of Schwing Stetter ZL48GV Wheel Loader

Engine

• BUCKET RANGE 3.0-5.0 cu.m
• Engine Power 230 hp
• Make Weichai
• Max Torque 1000 N.m
• Model WP7G234E501
• Operating Weight 17300 kg
• PAYLOAD CAPACITY 5000 kg
• Rated Power 230 HP
• Rated Speed 2150 r/min
• Tier CEV Stage IV
• Type Single line, vertical, four-stroke

Dimensions

• Bucket width 2996 mm
• Min. Ground Clearance 520 mm
• Overall height 3515 mm
• Overall Length (bucket on the ground) 8100 mm
• Overall Width 2850 mm
• Tread 2250 mm
• Wheelbase 3050 mm

Specifications

• Breakout force of bucket 160 KN
• Breakout force of lifting 110 KN
• Bucket volume 3.0 m3
• Center of the tyre 6020 mm
• Dumping angle of bucket ≥45 º
• Dumping reach ≥1110 mm (main cutting edge)
• Lifting time of boom ≤5.5 s
• Max. climbing gradient 29 º
• Max. dumping angle 45 º
• Max. dumping height ≥3040 mm (main cutting edge)
• Max. tractive force 160±5 kN
• Maximum digging depth 46 mm (the bucket bottom is level)
• Operating weight 17000 kg±300 kg
• Oscillating angle of the rear axle ±10 º
• Outside of the bucket 7120 mm
• Rated capacity 5000 kg
• Total cycling time ≤10.5 s
• Traveling speeds - Forward I /Reverse II 0~13/0~17 km/h
• Traveling speeds - Forward II 0~38 km/h
• Turning angle of the chassis 35±1º

Hydraulic System

• Boom cylinder Ø160×840 mm
• Displacement of oil pump 100 ml/r
• Pilot valve CRV-02
• Selecting valve SF8
• System Pressure 18.0 MPa
• Tilt cylinder Ø180×585 mm

TORQUE CONVERTER

• Conversion coefficient K=4.0±5%
• Cooling method Oil cooling-pressure circulating type
• Cyclic diameter 315 mm
• Model YJSW315-6BL
• Oil inlet pressure 0.45~0.55 MPa
• Oil outlet pressure 0.25~0.34 MPa

STEERING SYSTEM

• Displacement of oil pump 80 ml/r
• Flow magnifying valve ZLF25A1
• Maximum steering angle 35 º
• Steering cylinder Ø 100 mm×375 mm
• Steering limit valve VLE-150
• System pressure 16 MPa
• Type Articulation, flow magnifying type, hydraulic steering

Braking System

• Braking air pressure 685~824 kPa
• Foot brake Oil disc braking on 4 wheels
• Hand brake Soft shaft operation, inner expanding shoe type

TYRES

• Inflating pressure Fore tyre: 0.38-0.40 MPa/Rear tyre: 0.32-0.34 MPa
• Tyre Size 23.5-25

GEARBOX

• Gear number 2 forward and 1 reverse
• Transmission ratio - Forward I / Reverse I 2.547/1.864
• Transmission ratio - Forward II / Reverse II 0.6 83
• Working pressure of transmission pump 1.5 MPa
• Working pressure of transmission pumps 1171/min/2200r/min

FRONT AND REAR AXLE

• Connection type of front axle Rigid connection with chassis
• Connection type of rear axle Swing
• Hub reducer - Speed ratio 4.94
• Hub reducer - Type One stage-planetary deceleration
• Main reducer - Speed ratio 4.625
• Main reducer - Type Spiral gear-one stage deceleration