Caterpillar MT5300D AC Mining Trucks

Specifications of Caterpillar MT5300D AC Mining Trucks

Engine

• Bore 175.0 mm
• Displacement 85.0 L
• Engine Model Cat® C175-16
• Gross Power – SAE J1995 2610.0 kW
• Optional Gross Power – SAE J1995 2051.0 kW
• Standard Gross Power – SAE J1995 2610.0 kW
• Stroke 220.0 mm

Service Refill Capacities

• Cooling System 799.0 L
• Crankcase 310.0 L
• Final Drives, Each 254.0 L
• Fuel Tank 4922.0 L
• Hydraulic System (includes tank) 1458.0 L
• Hydraulic Tank 1121.0 L

Steering

• Steering Standards SAE J1511 OCT90; ISO 5010:1992

Operating Specifications

• Gross Machine Operating Weight (GMW) 521631.0 kg
• Minimum Turning Radius 16.2 m
• Nominal Payload Capacity 291.0 tonnes
• Steer Angle 39.0 Degrees
• Top Speed – Loaded 60.0 km/h

Dimensions

• Body Target Length 10211.0 mm
• Body Target Width 8560.0 mm
• Loading Height (standard body) 6712.0 mm
• Minimum Turning Radius 16154.0 mm
• Overall Height – Body Raised 14605.0 mm
• Static Loaded Ground Clearance at Front 810.0 mm
• Superstructure Width 8636.0 mm
• Truck Width over Deflectors 9093.0 mm
• Wheel Base 6655.0 mm
• Width over Rear Tires 8738.0 mm

Tires

• Standard Tires 53/80 R63

Sound

• Sound Standards The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 75 dB for cab.
• Sound Standards 2 Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.

Final Drives

• Total Reduction Ratio 35:1

AC Drive System

• Controls IGBT Inverter Technology, air cooled, pressurized cabinet with filtration
• Cooling System Variable speed, hydraulically driven cooling system
• Generator/Alternator Brushless, engine mounted, dual bearing
• Wheel Motor Cat AC induction, rear axle mounted

Capacity – MT Family HE – 100% fill factor

• Dump Body Plate Thickness Varies Depending on Body Selection – Canopy Plate 5.0 mm
• Dump Body Plate Thickness Varies Depending on Body Selection – Floor Plate 16.0 mm
• Dump Body Plate Thickness Varies Depending on Body Selection – Front Plate 9.0 mm
• Heaped (SAE 2:1) 180-222 m3 (236-290 yd3)
• Struck 108-133 m3 (142-175 yd3)

Weights - Approximate

• Body Weight Range 27451.0 kg
• Chassis Weight 188005.0 kg
• Gross Machine Operating Weight (GMW) 521631.0 kg

Weight Distributions - Approximate

• Front Axle – Empty 49.0 %
• Front Axle – Loaded 33.0 %
• Rear Axle – Empty 51.0 %
• Rear Axle – Loaded 67.0 %

ROPS

• FOPS Standards FOPS (Falling Object Protective Structure) meets ISO 3449:1992.
• ROPS Standards ROPS (Rollover Protective Structure) meets ISO 3471:1994.

Braking System

• Dynamic Retarding Power – Continuous 4086.0 kW
• Electric Retarding Radial Grid Design
• Front Wet Disc Brake Surface Area 131473.0 cm2
• Rear Wet Disc Brake Surface Area 198388.0 cm2
• Standards J-ASO 3450 JAN88 ISO 3450:2011