Caterpillar 924K Small Wheel Loaders

Specifications of Caterpillar 924K Small Wheel Loaders

Engine

• Displacement 7.0 L
• EEC 80/1269 102.0 kW
• Engine Model Cat® C7.1 ACERT™
• ISO 9249 (1997) 102.0 kW
• Net Torque 700.0 N·m
• Rated Net Power 101.0 kW
• SAE J1349 101.0 kW
• Stroke 135.0 mm
• Bore 105.0 mm

Weights

• Operating Weight 11550.0 kg

Transmission

• Forward 1 13.0 km/h
• Forward 2 13.0 km/h
• Forward 3 27.0 km/h
• Forward 4 40.0 km/h
• Reverse 1 13.0 km/h
• Reverse 2 13.0 km/h
• Reverse 3 27.0 km/h
• Reverse 4 40.0 km/h
• Standard transmission max travel speeds: 40.0 km/h

Service Refill Capacities

• Cooling System 32.0 L
• Crankcase 19.5 L
• Front 21.0 L
• Fuel Tank 195.0 L
• Hydraulic System (including Tank) 160.0 L
• Hydraulic Tank 90.0 L
• Rear 21.0 L
• Transmission 8.5 L

Steering

• Maximum working pressure 24130.0 kPa
• Steering angle, each direction 40.0 Degrees
• Steering Articulation 40.0 Degrees
• Steering cylinders, two, bore 70.0 mm

Operating Specifications

• Articulation Angle 40.0 Degrees
• Dump clearance - Full lift/45 degree dump angle 2772.0 mm
• Reach - full lift/45 degree dump angle 1016.0 mm
• Static Tipping Load (Full Turn) 7488.0 kg

Dimensions

• Bucket Pin Height at Max Lift 3853.0 mm
• Carry Height 447.0 mm
• Center Line of Front Axle-Hitch 1500.0 mm
• Digging Depth 100.0 mm
• Dump Angle at Max Lift 50.0 Degrees
• Dump Clearance-Max Lift-45° 2857.0 mm
• Ground Clearance 397.0 mm
• Height to Center of Axle 685.0 mm
• Height to Top of ROPS/FOPS 3340.0 mm
• Length - Rear Axle to Bumper 1986.0 mm
• Overall Height - Bucket Raised 5076.0 mm
• Overall Length 7374.0 mm
• Rack Back Angle at Carry 43.0 Degrees
• Rack Back Angle at Max Lift 53.0 Degrees
• Reach at Max Lift and 45° Dump 950.0 mm
• Wheel Base Length 3000.0 mm
• Width over tires 2540.0 mm

Tires

• Size 20.5 R25 Radial (L-3)

Cab

• FOPS SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II
• ROPS SAE J1040 MAY94, ISO 3471-1994

Buckets

• Bucket Capacities 1.7 m3 - 5.0 m3 2.2 yd3 - 6.5 yd3

Loader Hydraulic System

• Bore 110.0 mm
• Dump 1.5 Seconds
• Hydraulic Cycle Time 9.5 Seconds
• Hydraulic cycle time: 9.5 Seconds
• Lower, empty, float down 2.6 Seconds
• Maximum working pressure 2600.0 kPa
• Pump flow - Implement pump 150.0 L/min
• Raise 5.4 Seconds
• Stroke 728.0 mm
• Total 9.6 Seconds